Mud Pumps Valves
The valves belong to the Fluid ends in pressure installations used in oil industry.
Working medium: drilling mud, other fluids with similar characteristics.
1. Seat 20MoNi35/ STAS 791
2. Disk 20MoNi35/ STAS 791
3. Gasket rubber
4. Plate IC45/SR EN 10083
5. Halfring IC45/SR EN 10083
6. Safety 60Si15A/ STAS 795
7. Guide rubber
8. Spring 60Si15A / STAS 795
The valves are seat guide type with low resistance on the fluid flow. The valve gasket is symetric with two faces which can be reversed and used further after the first workface has been worn.
The valve seat is mounted in the hydraulic body by pressing on the cone and seals against this metal-to-metal. The seat and the valve disk are hardened by carburation and have high-resistance against wear.
The valve spring provides a proper steadiness of the valve during operation.
- Disk and seat: forged alloy steel
- Gasket: rubber with special characteristics
Technical and dimensional characteristics
|Item||Valve symbol||DN, in||PN, bar||Passing area through valve seat||Passing area through open valve||Valve strike||Net weight|